Product Description
Weather-proof Enclosed Double Stage Vacuum Dehydration Degasification Transformer Oil Purifier
It can quickly remove the water, gas, and other contaminants such as solid particles in the waste insulating oil, transformer oil, capacitor oil, switch oil, mutual inductor oil, etc. The breakdown voltage of the oil after processed can be improved by 35KV or above just for one-time. It is mainly suitable for the power transmissions equipment whose voltage is 110KV or above. It can be equipped with mobile trailer and weather-proof enclosure.
Container Enclosure Transformer Oil Filtration and Purification Plant for Outdoor Substation Maintenance
HOPU Enclosed Oil Purifier Application
Weather-proof canopy enclosed type transformer Oil Purifier installed with weather-proof ,dust-proof canopy, it is can be working for outdoor area.
The steel enclosure canopy is suitable for weather-proof ,dust-proof site working
The aluminum enclosure canopy is IP55 protection.
It is is professional for treatment of transformer oil, suitable for outdoor oil filtration, vacuum oil injection and cyclic hot oil drying in the installation and maintenance of large capacity transformers.
Double-stage High Vacuum Transformer Oil Filtration Machine is a ultra high vacuum oil dehydration system for Dielectric Transformer Oil Purification and Oil Filtering. This transformer oil filtration equipment can quickly remove water, trace water, gas, particles as well as acetylene, hydrogen, methane and other harmful ingredients from oil effectively to improve oil's dielectric strength, effectively making sure electric equipment working safely and normally. It's particularly suitable for treating high-grade transformer oil, super-voltage transformer oil and new transformer oil. It can be used for filtration of more than 110V substation live line work on-site. Meanwhile, it can be used as independent vacuum resource with functions of vacuum drying and vacuum oiling.
Weather-proof Canopy Transformer Oil Purifier for outdoor service Features
1. Weather and dust resistant, convenient for outdoor use.
2. And it has double-stage high pumping speed vacuum system, multistage stage vacuum analytical separation system, it can quickly separate out water, gases, impurities, polar substances and other deteriorated materials.
3. Adopting the three-dimensional flash evaporation dehydration and degassing technology, it high efficiently separates water, gases from the oil, making the breakdown voltage rapidly increase to above 75KV.
4. Adopting the complex high speed degassing spiral flow structure, oil gas separate dual channel technology, re dissolution technology in anti oil gas separation, it quickly removes various organic hydrocarbon gases, ensuring no acetylene and hydrogen in oil.
5. Adopting carbon fiber infrared heating, grouped ultra low surface load, PID constant temperature control and dual temperature flow protection technology. Inside the machine installed the the diameter increase oil flow direction turning overflow technology to prevent "dead oil area", over-temperature and drying.
6. Adopting multistage high β value compound filtration system, linear coupling filter seal, it can effectively filter even the tiny particles mechanical impurities.
7. Specially made precise oil pump with low noise meeting environmental protection requirement.
8. Online filtering oil; with nobody watching is okay, and it can also be used for vacuum oiling the transformers etc and drying its hot oil.
9. Equipped with advanced infrared liquid level auto control system, auto defoaming control system, pressure protection system and safety interlock control to ensure that the equipment work for long time, safely and reliably.
Transformer Oil Purification Plant Technical data
| Parameters | Model Unit |
ZYD-E | ||||||
| Flow Rate | L/H | 1800 | 3000 | 6000 | 9000 | 12000 | 15000 | 18000 |
| Working Vacuum Degree | MPa | -0.08 ~ -0.099 | ||||||
| Working Discharge Pressure |
MPa | ≤ 0.3 | ||||||
| Temperature Control Range |
ºC | 20 ~ 80 | ||||||
| Operation Temperature | ºC | 40 ~ 70 (65ºC is best) | ||||||
| Power Supply | 380V, 50Hz, 3 phases (or as per your requirements) | |||||||
| Working hours without Trouble |
Hour | 4000 | ||||||
| Continuous Working Hours | Hour | 150 | ||||||
| Ambient Temperature | -25 ~ 55ºC | |||||||
| Working Noise | dB(A) | 65 ~ 90 | ||||||
| Heating Power (adjusted available) |
KW | 30 | 48 | 60 | 90 | 135 | 150 | 180 |
| Total Power | KW | 35.5 | 52.5 | 68 | 105 | 154 | 165 | 208 |
| Inlet/Outlet | mm | φ25 | φ32 | φ42 | φ50 | φ50 | φ60 | φ60 |
| Weight | Kg | 600 | 700 | 1050 | 1150 | 1450 | 1600 | 1950 |
| Dimension | mm | 1380×1020×1760 | 1610×1250×1950 | 1750×1350×2150 | 1850×1400×2200 | 1950×1500×2300 | 2050×1600×2400 | 2200×1750×2550 |
| After Filtration | Moisture (Water Content) ≤ 5 PPM | |||||||
| Gas Content ≤0.01% (Vol) | ||||||||
| Impurities Degree (Filtration precision) ≤ 1 micron (no free carbon) | ||||||||
| Breakdown Voltage (Dielectric Strength) ≥70 KV | ||||||||
| Flash Point ≥145ºC | ||||||||
| Cleanliness ≤NAS 1638 Grade 6 | ||||||||
Note: 1. The dimension and weight will be changed with changing of technical specs.
2. All the specs can be customized according to client's requirements.
HOPU Oil Purification Machine Optional Design
1.Siemens Brand P.L.C (Programmable Logic Controller)
2.Flow Meter
3.Continuous Online Moisture Analyzer in Oil
4.Continuous Online Moisture and Particles in Oil Monitor
5.Metallic Weather Proof Enclosure
6.Double-axles trailer for outdoor use
7.Regeneration system with special brand of earth can remove acidity, sludge, other soluble oil decay products and discoloration
