Product Description
PLC Fully Automatic Transformer Oil Regeneration Equipment Application
This Oil Vacuum Dehydration Machine can quickly remove the water, gas, and other contaminants such as solid particles in the waste insulating oil, transformer oil, capacitor oil, switch oil, mutual inductor oil, etc.
Can be automatically operated with P.L.C (Programmable Logic Controller).
On-line water content measuring device.
HOP ZY-I series vacuum transformer oil purifier is installed with insulation oil regeneration chamber,which uses a special purifying agent to regenerate and purify transformer oil, mutual inductance oil, switching oil and other insulating oils. It can also be used as an adsorption device for some low viscosity lubricants. It can effectively remove acidic components, free carbon, oxides, pigments, impurities, etc. in oil. After processing, it will not damage the basic composition and oxidation resistance of the oil, restore the dielectric properties of the insulating oil, the transformer oil after regeneration is clear and transparent. The cost is 80% less than the traditional method of replacing new oil.
Mobile Multifunctional transformer oil purification decolor purifier unit is used for new oil, imported oil, waste transformer oil, transformer oil and transformer system capacitor oil and refrigerating oil etc. It can also be used for vacuum oiling and drying of transformer.
Features:
1) The waste acid value of the transformer oil insulation oil can be reduced quickly and effectively.
2) Reduce the dielectric loss of insulating oil, so that it reaches the national standard
3) Hot oil circulation
4) Transformer oil dehydration, degassing (acetylene hydrogen methane harmful gases), in addition to impurities
5) Transformer oil filter clean
6) sucking vacuum from used transformer oil
7) With the oil exchange function
8) Perform on-site oil treatment and dry electrical equipment
9) Vacuum filling of electrical equipment
10) Trace moisture purification treatment
11) It Can even be used for deep processing trace amounts of water for certain lubricants
12) Unique regenerative decolorization system. The polymer adsorbent is used as a carrier to neutralize the acidic components in the adsorbed oil and use micropores to trap the free carbon and fine gelatin in the oil so as to change the color and the high acid and decolorization performance. And design a flexible discharge device, a short time, quick, less dosage. In the vacuum decolorization, can greatly reduce the cost of recycling, waste does not pollute the environment (can be used for building walls and paving), non-toxic.
13) Handling once, the breakdown voltage can be increased 35-45KV, reduce the aging oil by frequent heating.
14) Machine with a chain of security features, oil inlet and and heating system linkage, to avoid the adverse effects of misuse.
TECHNICAL DATA (specs will be changed when changing requiremnts
Item | Unit | ZY-I-10 | ZY--I20 | ZY-I-30 | ZY-I-50 | ZY-I-100 | ZY-I-150 | ZY-I-200 | ZY-I-300 |
Flow Rate | L/min | 10 | 20 | 30 | 50 | 100 | 150 | 200 | 300 |
Vacuum Degree | MPa | -0.06 ~ -0.095 | |||||||
Working Pressure | MPa | ≤0.4 | ≤0.4 | ≤0.4 | ≤0.5 | ≤0.5 | ≤0.5 | ≤0.5 | ≤0.5 |
Temperature Range | ℃ | 20-80 | |||||||
Continuous Working | Hour | 150 | |||||||
Power Supply | 380V/ 50HZ/ 3Phase(As per client’s request) | ||||||||
Working Noise | dB(A) | ≤75 | ≤75 | ≤75 | ≤75 | ≤80 | ≤80 | ≤80 | ≤80 |
Heating Power (OPTIONAL) | kW | 21 | 24 | 26 | 30 | 48 | 58 | 70 | 85 |
Total Power | kW | 22.5 | 25.5 | 27.5 | 33.5 | 53 | 65 | 76 | 94 |
Inlet (outlet)Caliber | mm | 25 | 25 | 25 | 32 | 42 | 50 | 50 | 60 |
Weight | kg | 230 | 250 | 270 | 300 | 550 | 700 | 950 | 1200 |
After Purification | |||||||||
Breakdown Voltage | kV | >70 | |||||||
Water Content | PPM | <4 | |||||||
Gas Content | % | <0.1 | |||||||
Particles Size | μm | <3 |
You May also be interested in:
A: Transformer Oil Tester, Testing the insulating oil's dielectric strenght
B: Vacuum Pumping Set, pumping the transformer
C: Moisture Meter, measuring the water content in the transformer oil
D: Flow meter, measuring the flow oil quanity through the machine